viper 5701

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

bigjake21782

Member - Posts: 10

Joined: March 20, 2011

Posted: March 20, 2011 at 1:47 PM / IP Logged

One quick question. How can I prevent my cars parking lights from flashing with this unit installed. I'm sure there is some way. I just don't want the visual confirmation.

Jake

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 20, 2011 at 3:50 PM / IP Logged

Refer to your programming sheet.

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: March 20, 2011 at 3:53 PM / IP Logged

Do not connect the white parking light wire. Also, you didn't post year make and model so it is hard to say if it will flash with lock and unlock. If you are using a data bypass it may flash the lights regardless of the viper

Advanced

bigjake21782

Member - Posts: 10

Joined: March 20, 2011

Posted: March 20, 2011 at 4:04 PM / IP Logged

howie ll wrote:

Refer to your programming sheet.

Pretty sure I've done that already but thanks anyway

bigjake21782

Member - Posts: 10

Joined: March 20, 2011

Posted: March 20, 2011 at 4:06 PM / IP Logged

dasbogie wrote:

2011 Honda crv. It uses the pkall as the bypass. so basically if I go cut the white parking light wire everything will work like normal but my parking lights won't turn on. You don't think that will stop the unlock and lock flash though

Thanks

Jake

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 20, 2011 at 6:02 PM / IP Logged

Either cut it and isolate it or just pull the fuse out.

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 20, 2011 at 6:03 PM / IP Logged

Oh yeah, it will cause your lights to not flash on lock/unlock as well. If they are flashing after remote start you can change the settings on the Viper to constant parking lights instead.

bigjake21782

Member - Posts: 10

Joined: March 20, 2011

Posted: March 20, 2011 at 6:04 PM / IP Logged

Which fuze. The cars parking light fuze or is there on in the module. Also will this stop them from flashing on unlock and lock. That's my main thing I'm trying to figure out

Thanks

Jake

bigjake21782

Member - Posts: 10

Joined: March 20, 2011

Posted: March 20, 2011 at 6:10 PM / IP Logged

Stupid iPad and autocorrect picked up fuze instead of fuze. Next question is what about the white wire with brown tracer. Light flash. What does that one exactly do

Thanks again

Jake

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 20, 2011 at 6:12 PM / IP Logged

Yes it will also stop the lights from flashing during lock and unlock. There is a little panel on the viper unit that unsnaps, thats where the fuse is located. If you still want confirmation for your door locks you could hook up the horn trigger...it will honk once for lock and twice for unlock.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.