viper 5901 remote start, 98 altezza

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 remote start, 98 altezza (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

monks

Member - Posts: 6

Joined: March 24, 2011

Posted: March 24, 2011 at 10:38 PM / IP Logged

i have a a viper 5901 wired on my 98 6 speed altezza but the remote start its not activating each time i get remote start error on the remote 7 flashes i went throught the steps as stated in the book but the same problem

can i have some insight into this

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 24, 2011 at 11:11 PM / IP Logged

Is this system new or has it been in for a while and no longer working? what steps are you taking?

Back to Top

monks

Member - Posts: 6

Joined: March 24, 2011

Posted: March 24, 2011 at 11:52 PM / IP Logged

it is a new system just installed on the car as it stand now dont know how to move forward

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 25, 2011 at 12:02 AM / IP Logged

if you're doing the remote start initialization correctly it should stay running until you lock the doors. does it do that?

Back to Top

monks

Member - Posts: 6

Joined: March 24, 2011

Posted: March 25, 2011 at 12:11 AM / IP Logged

no it doesn't reach that far

everything else on the system works and works well

when i go through the steps to initialize the system it show remote start error on the remote and u get 7 flashes

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 25, 2011 at 12:25 AM / IP Logged

So you're getting the remote start error when you attempt to activate the remote start with the car running, after you put the e-brake on? For programming, how many pulses to activate do you have it programmed to. The default is 1. If you program it to 2 or 3. the remotes are very picky how fast/slow you press the button.

Back to Top

monks

Member - Posts: 6

Joined: March 24, 2011

Posted: March 25, 2011 at 12:29 AM / IP Logged

yes its at default so its at one

cant seem to figure out this thing

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 25, 2011 at 12:33 AM / IP Logged

do you have the neutral safety switch plugged in and turned on?

Back to Top

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 26, 2011 at 2:54 PM / IP Logged

Are all of the doors and hood shut when you are putting it in manual transmission mode?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 remote start, 98 altezza

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.