avital status light

Home / the12volt's Install Bay / Car Security and Convenience / avital status light (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

woody7885

Member - Posts: 1

Joined: April 02, 2011

Location: Tennessee, United States

Posted: April 02, 2011 at 7:52 AM / IP Logged

I had a miniture car painted the same color as my car. The big car has green underbody, and the little car has a green led in the backseat. I was attempting to attatch the small led to the status light of my alarm (the light the blinks while the car alarm is on) But i am unsure what output the status light has. I attempted to connect it directly to tle wire and ground it other places, but it didnt work, so i plugged it to the park lamps. Do i need a relay for connnections between a staus light and a additional LED? I have a avistart alarm, fully connected.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 02, 2011 at 8:34 AM / IP Logged

Wire in parallel

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 02, 2011 at 8:35 AM / IP Logged

Oh and it's a 2.5 volt LED, don't get a 12volt.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avital status light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.