Help setting invisibeam sensor

Home / the12volt's Install Bay / Car Security and Convenience / Help setting invisibeam sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

magic2

Member - Posts: 30

Joined: February 19, 2003

Location: United States

Posted: April 26, 2003 at 3:38 PM / IP Logged

I have a viper 790 installed in my truck. I had the invisibeam sensor installed and want to know how to adjust it. There are 2 adjustement screws on the sensor it self. I just don't know how to set them , or what they are for.

thanks in advance

John.

krazypolishboy

Member - Posts: 17

Joined: January 25, 2003

Location: United States

Posted: April 27, 2003 at 9:03 PM / IP Logged

are they side by side? if so the one on the left is for the sensitivity of the exterior of the car, left= less detection, right=increased sensitivity, and the knob on the right is for the interior of the car

Search for other posts by krazypolishboy

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help setting invisibeam sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.