python 991 in 66 chevelle

Home / the12volt's Install Bay / Car Security and Convenience / python 991 in 66 chevelle (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jazric11

Member - Posts: 1

Joined: May 18, 2011

Location: Colorado, United States

Posted: July 18, 2011 at 3:52 PM / IP Logged

I upgraded the wiring to a Painless 18 circuit system so it's not factory. I also installed door lock kit (Electric Life LK01-10-122).

I don't intend to use remote start. I want to have starter kill.

Do I need to hook up everything in the H3 section of the Python 991?

The documentation suggests an "onboard starter kill relay" and I can't for the life of me figure out where it is.

Can I ignore the 5 Pin connector for Remote start input?

itsyuk

Silver - Posts: 505

Joined: February 23, 2010

Location: United States

Posted: July 20, 2011 at 1:08 PM / IP Logged

given your situation i think i would leave out the H3 harness and use a standard starter kill relay controlled by the orange "ground when armed" wire.

yuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 991 in 66 chevelle

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.