led specs on the clifford 50.5x

Home / the12volt's Install Bay / Car Security and Convenience / led specs on the clifford 50.5x (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

o2civic

Member - Posts: 6

Joined: June 16, 2007

Location: United States

Posted: July 20, 2011 at 8:15 PM / IP Logged

I'm looking to upgrade my LED to something brighter. I have dark tints and can barely see the LED flash when the alarm is active.

Anyone have any suggestions that does not require modifying too much? Plug and play would be perfect.

Thanks!

o2civic

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 20, 2011 at 8:30 PM / IP Logged

Do you have a volt meter? Is there a way to make the LED illuminate without flashing?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 21, 2011 at 4:46 PM / IP Logged

it's a 2.5 volt LED as standard Mr.I and there's no plug and play replacement apart from the one used on Clifford G5 product which is brighter. alternatively go for a 10mm ultrabright with maybe a resistor.

Red is the cathode (+) and blue is the anode (-) neg.

Back to Top

tonanzith

Gold - Posts: 593

Joined: July 18, 2008

Location: Washington, United States

Posted: July 21, 2011 at 10:05 PM / IP Logged

A plug and play replacement no, but there are 2 watt ultra bright LED's that can be added on using the orange ground when armed wire of the 50.5x.

Gary Sather

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led specs on the clifford 50.5x

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.