the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

python 592 multiple sensor reporting


Post ReplyPost New Topic
< Prev Topic Next Topic >
bantham1 
Member - Posts: 12
Member spacespace
Joined: July 26, 2011
Posted: July 26, 2011 at 10:15 PM / IP Logged  
I have a python 592 with a tilt and glass break sensor. Is there a way to program both sensors to report as "tilt" and "glass break." There is only 1 aux input on the brain so how does the alarm distinguish between both sensors? right now the glass break is reporting correctly as "glass break" but the tilt is reporting as "trunk trigger."
itsyuk 
Silver - Posts: 505
Silver spacespace
Joined: February 23, 2010
Location: United States
Posted: July 27, 2011 at 4:19 AM / IP Logged  
if the alarm has only one zone, that all there is ....BUT...
you could diode isolate each input on the wire and use multiple 795T (non- vibrating) or 795W (vibrating)pager system to tell you which item is triggering. these old pager systems are cool, the pager could pick up 3 different channels from the transmitter that came with it and could also pick up other optional transmitters from 2 other cars ....
or.. you could install 1, 2, or 3 transmitters on a single car and have the pager monitor them all at the same time.
on my upcoming roadmaster wagon install i am using 2 transmitters and can seperately monitor doors, front radar, rear radar, rear gate, hood, and 520t all at once. the doors are the only one not on the single blue mpx wire. its best to tie all warn-away wires to the shock sensor input.
if a1, a2 or a3 light up on the pager, i know the vehicle has had a door, rear gate or hood breeched.
if b1, b2 or b3 light up, its one of the 3 sensors i mentioned.
just something to think about.
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.
bantham1 
Member - Posts: 12
Member spacespace
Joined: July 26, 2011
Posted: July 27, 2011 at 7:38 AM / IP Logged  
You could do that but that sounds like a lot of pagers. I have the full HD remote and saw in the demo all those cool animations for each trigger zone but I can only use the glass break. You think they would have put more sensor inputs in the brain to accommodate more sensors to report correctly
itsyuk 
Silver - Posts: 505
Silver spacespace
Joined: February 23, 2010
Location: United States
Posted: July 27, 2011 at 1:43 PM / IP Logged  

no a single pager can monitor 3 different transmitters(broadcasting 3 channels) giving up to 9 discreet channels.

you only carry one pager and

a1,a2,a3 is one tranmitters channels

b1, b2, b3 is another

and c1, c2, c3 are yet another

yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer