02 rsx type s, viper 5901

Home / the12volt's Install Bay / Car Security and Convenience / 02 rsx type s, viper 5901 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

integraking

Member - Posts: 32

Joined: November 03, 2009

Location: Virginia, United States

Posted: October 04, 2011 at 9:17 PM / IP Logged

ok so yesterday i picked up a viper 5901 with a idatalink transponder bypass module and decided to install it today by myself..lol...i've got a few questions that i need help with that somebody with expertise could answer...alright here they go...1. for the bypass transponder im not sure which wire i should connect the "ground when running" wire to...its either that -200 status output or ground when armed output?...2. the car is a five speed i've been told you can bypass the clutch by connecting two wires but im not sure which it is?...3. on the alarm there are these other extra wires in the remote start harness that have relay numbers to them and i have no idea if i should hook these up or to which wires do i hook them up to...

integraking

Member - Posts: 32

Joined: November 03, 2009

Location: Virginia, United States

Posted: October 05, 2011 at 11:56 AM / IP Logged

can somebody help me please!!!

kreg357

Platinum - Posts: 7,788

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 05, 2011 at 6:54 PM / IP Logged

If you are going W2W between the iDatalink bypass module, connect the GWR wire to the Vipers Blue (-) 200mA Status Output wire. Which iDatalink module? Some do more than just the transponder bypass and that will affect how you wire the Viper.

Use a relay to bypass the clutch switch. Basically, the relay will be wired like this :

Relay Pin 85 to Viper Pink (-) 200mA Ignition 1 Output

Relay Pin 86 to +12V constant

Relay Pin 30 to one side of clutch switch

Relay Pin 87 to other side of clutch switch

Relay Pin 87A not used - insulate

There will be many unused wires from the Viper. Download the wire guides that are available for you car. Compare them and then locate and verify the actual wires in your car with a Digital Multi Meter . Then make up a chart from the Vipers connectors to the cars wires. Post this chart for member inputs.

Soldering is fun!

integraking

Member - Posts: 32

Joined: November 03, 2009

Location: Virginia, United States

Posted: October 07, 2011 at 12:26 AM / IP Logged

well i was getting frustrated with the idatalink..lol..so i switched over to a xpresskit xk05...i've got it flashed for my car which is a 02 acura rsx...i've already programmed the key..but the problem im having now is that on the remote start the car all i get is 7 parking light flashes...i checked the manual and it reads...the manual mode is enabled but not initialized...which i thought was really weird because i connected the tach wire to the car and learned the tach, bypassed the clutch..i even connected the toggle switch that disables the remote start and i turned it on...still doesnt work...i was reading the manual i downloaded and on the remote start harness they have these wires for a flex relay that i was unsure of using or not...i just used the red 12v,pink ignition, purple starter and orange for accessory...maybe that could be the reason why things wont work?...btw thanks for the reply

kreg357

Platinum - Posts: 7,788

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 07, 2011 at 1:31 AM / IP Logged

Are you entering Manual Transmission Reservation Mode as described on Page 28 of the Owners Guide?

http://www.directeddealers.com/manuals/OG/Viper/G5702V%202008-08web_small.pdf

The Flex realy should be programmed for ACC2 and the Vipers' Pink/White wire connected to the cars WHITE/ Red ACC2 wire. H3/2 RED / White should be connected to a +12V constant source.

The Neutral Safety wire should be connected to the (-) Emergency Brake wire when in manual transmission mode.

Parking Brake GREEN/ orange (-) dash fuse box, lt. green 8 pin plug, pin 8

The Viper 5901 is a sophisticated / complex high-end system. Installing a remote start on a manual transmission vehicle must be done in accordance with all recommended guidelines followed exactly. Bypassing any of the built in safeties ( like the clutch pedal interlock switch ) can allow the car to start in gear causing a very dangerous condition.

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 rsx type s, viper 5901

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.