2002 jeep with dlpkchg1?

Home / the12volt's Install Bay / Car Security and Convenience / 2002 jeep with dlpkchg1? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jasn1981

Member - Posts: 3

Joined: July 27, 2004

Location: United States

Posted: October 06, 2011 at 1:40 PM / IP Logged

Ok. I have a question. How would I get the door locks to work/factory arm/disarm.

It should be d2d with my viper 5902, buw won't do ANYTHING. I have the alarm/remote start all complete, but when I go to test it the locks and unlocks won't activate nor will the lights which may or may not be controlled via the data bus.

I can't find instructions for my rig anywhere, but keep being told it will work on my jeep. Do i need to connect something other than just the Data to the OBD and the D2D cable?

Thank you!

Back to Top

jasn1981

Member - Posts: 3

Joined: July 27, 2004

Location: United States

Posted: October 06, 2011 at 1:43 PM / IP Logged

Side note can I hook up the rear defrost wire at the switch and have it work?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 jeep with dlpkchg1?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.