cruze fortin evo all programmin

Home / the12volt's Install Bay / Car Security and Convenience / cruze fortin evo all programmin (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mike_81

Member - Posts: 1

Joined: October 22, 2011

Location: Austria

Posted: October 22, 2011 at 9:49 AM / IP Logged

Hi guys,

This is my first post. I have a (European) Cruze. I wanted to install a keyless go and push to start system form advancedkeys (AK 103). They told me I need a bypass kit. So far so good. I tried to connect the proper wires (Hardware Vers 3.0 Firmware 3.10) and programm it. There is a part in the manual that has to be completed in less than 5 sec and here the problem starts. It says turn to run position (start the car ?!?) and wait for red led to flash once. The red light goes off and comes back on solid. Turn off and on again => the red led flashes 3 times and comes back on solid instead of the yellow led flashing 10 times. So I am stuck. All the wires are connected properly. Although I did not connect the keyless system yet. I wanted to program the evo first.

Thanks for your help, I am fresh out f ideas!

Cheers

Michael

Back to Top

red737

Member - Posts: 1

Joined: March 27, 2013

Location: Kazakhstan

Posted: March 27, 2013 at 12:37 PM / IP Logged

I have the same problem, programming procedure are different US and European GM cars. but nobody knows how to make programming of european cars, exept russian fortin, but they keep it in a secret. cruze fortin evo all programmin -- posted image.

cruze fortin evo all programmin -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cruze fortin evo all programmin

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.