viper 5901 status led solid on

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 status led solid on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gtdan01

Member - Posts: 3

Joined: November 01, 2011

Location: California, United States

Posted: November 01, 2011 at 12:27 AM / IP Logged

Anybody have this issue with the status led on the control center being solid on no matter what? Begining to think there is something wrong with the control center.

i am an idiot

Platinum - Posts: 13,671

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 01, 2011 at 3:51 AM / IP Logged

I have no idea if the Viper units do this as well, but some units use this to tell you that the alarm is in Valet Mode.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 01, 2011 at 5:21 AM / IP Logged

Agreed, check your owner's manual.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 01, 2011 at 6:25 AM / IP Logged

The old ones were open door, press lock/unlock/lock on the remote.....

Mike M2

Tech Manager

CS Dealer Services

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 01, 2011 at 6:34 AM / IP Logged

Try pressing the F button twice and then press the UNLOCK button. As Mr Idiot stated, it is probably in Valet Mode.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

gtdan01

Member - Posts: 3

Joined: November 01, 2011

Location: California, United States

Posted: November 01, 2011 at 2:01 PM / IP Logged

I will try it. Seems like everything works correctly otherwise.

gtdan01

Member - Posts: 3

Joined: November 01, 2011

Location: California, United States

Posted: November 01, 2011 at 2:12 PM / IP Logged

Well just tried it on the lcd 2 way paging remote. It had the lock colored in and the blanked out to just an outline when I switched it over saying it was in valet everytime you unlock or lock. So it definitely was not in valet, I had tried this before via the control center button to make sure it wasn't in valet.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 status led solid on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.