08 civic and remote start avital 4103

Home / the12volt's Install Bay / Car Security and Convenience / 08 civic and remote start avital 4103 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wyciwug

Copper - Posts: 156

Joined: February 08, 2008

Location: Virginia, United States

Posted: November 05, 2011 at 12:41 PM / IP Logged

completed the installation with DBALL. However, I keep getting LED flashes 4 times: remote control shutdown.

can will crank but not start. It only starts with key in ignition.

When i tried to learn tach, follow the manual but the LED will not come on while HOLD the switch down within 5 seconds of started the car.

What could be the problem?

I connect the purple white to ignition coil's wire: BLACK/ white.

Help please.

dcd

Back to Top

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: November 05, 2011 at 3:01 PM / IP Logged

Thats not the right tach wire in that car,you can use any wire thats Not BLACK/ white,black or yellow/black,any ignition coil or fuel injector wire

triniforever

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

08 civic and remote start avital 4103

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.