the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5501 won't start truck

Home / the12volt's Install Bay / Car Security and Convenience / viper 5501 won't start truck (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
bpkota 
Member - Posts: 4
Member spacespace
Joined: October 27, 2011
Location: Virginia, United States
Posted: November 13, 2011 at 11:38 AM / IP Logged  
I just installed a Viper 5501 in my 98 Dodge Dakota...I get a remote Start Error when I try to start. The lights blink 8 Times, According to the manual. Neutral safety wire has no ground or the neutral
safety switch is Off. I have tried grounding it to the chassis and tied in with the system ground. It does not make a difference. Any help would be great.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: November 13, 2011 at 12:32 PM / IP Logged  
Is the truck a Automatic or Manual??  Is the toggle switch plugged in and in the ON position?  Where is the BLACK/ White (-) Nutral saftey input connected.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
bpkota 
Member - Posts: 4
Member spacespace
Joined: October 27, 2011
Location: Virginia, United States
Posted: November 13, 2011 at 12:36 PM / IP Logged  
smokeman1 wrote:
Is the truck a Automatic or Manual??  Is the toggle switch plugged in and in the ON position?  Where is the BLACK/ White (-) Nutral saftey input connected.
The truck is an automatic. Toggle Switch is plugged in and On. BLACK/ white wire is currently connected to the ground in the driver side kick panel.
bpkota 
Member - Posts: 4
Member spacespace
Joined: October 27, 2011
Location: Virginia, United States
Posted: November 13, 2011 at 3:02 PM / IP Logged  
Got it working, The toggle switch wasn't plugged in all the way.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: November 13, 2011 at 4:48 PM / IP Logged  
Another successful install !! 
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
bpkota 
Member - Posts: 4
Member spacespace
Joined: October 27, 2011
Location: Virginia, United States
Posted: November 13, 2011 at 5:30 PM / IP Logged  
smokeman1 wrote:
Another successful install !! 
Thanks Bro..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer