viper 5900

Home / the12volt's Install Bay / Car Security and Convenience / viper 5900 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

forged71

Member - Posts: 5

Joined: October 09, 2011

Location: Kentucky, United States

Posted: November 19, 2011 at 12:08 PM / IP Logged

I have installed the alarm following the guides and wire diagram problem is my door trigger wire according to the diagram is a negative trigger and the viper harness say its the green wire from the H1 harness however my door open dash light glows when doors are shut and gets bright when they are open...any thoughts???

Trial And Error!

forged71

Member - Posts: 5

Joined: October 09, 2011

Location: Kentucky, United States

Posted: November 19, 2011 at 1:37 PM / IP Logged

Might add that it's installed in a protege5 I'm pretty sure it's wired right. Any help would be great.

Trial And Error!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 19, 2011 at 1:46 PM / IP Logged

Use a DEI DTI* Mazda converter your door switches are opposite to normal, i.e. ground on shut, go open circuit when the doors are opened.

Or check the programming you might be able to program for it.

forged71

Member - Posts: 5

Joined: October 09, 2011

Location: Kentucky, United States

Posted: November 19, 2011 at 3:50 PM / IP Logged

Ok I've tried searching for the dei tdi Mazda converter but nothing shows do you by chance know where I can find one?

Trial And Error!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 19, 2011 at 5:36 PM / IP Logged

What year is your Mazda?

forged71

Member - Posts: 5

Joined: October 09, 2011

Location: Kentucky, United States

Posted: November 19, 2011 at 6:00 PM / IP Logged

It's a 2003 protege5..

Trial And Error!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 19, 2011 at 6:09 PM / IP Logged

Did you connect the 5900 green door trigger wire to a BLACK/ blue in the driver kickwell?

Incidentally it's Trial AND Error.

When I see unchecked typos like that I always worry about the install quality.

forged71

Member - Posts: 5

Joined: October 09, 2011

Location: Kentucky, United States

Posted: November 19, 2011 at 9:17 PM / IP Logged

Yes I did.

Trial And Error!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5900

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.