uncut key programming

Home / the12volt's Install Bay / Car Security and Convenience / uncut key programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 01, 2012 at 7:17 AM / IP Logged

Doing a 05 Mercury Mariner with a key in the box... it is New Years day and no where to get a key cut. I think I have seen ideas on programming the third key without cutting it to put it in the cylinder??? I cant seem to find any with a search... Any ideas would be great..Thanks in advance!!!!

mobileedgeny

Member - Posts: 32

Joined: October 18, 2011

Posted: January 01, 2012 at 8:17 AM / IP Logged

turn ign on with key 1 wait for theft light to go out, turn gin on with key 2 wait for theft light to go out, remove. remote start car with key in bypass module. car should start if positioned correctly. or can leave in the ignition cal to remote start car.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

uncut key programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.