cm6200 plus dr1000 issues

hey guys i have a 98 chev pickup with a cm6200 remote starter purchased a dr1000 from ebay and upon installation found that the idatalink bypass module is using the r232 data connector im not sure what to do here i tried not using the data and hard wiring to pin 14 but it doesnt work for some reason im assuming it wants to use the dataline any advice or info would be appreciated

hardwire or w2w the bypass to the cm6000 and d2d the drone. or you can piggyback the d2d connector as well. the compustar will differentiate the drone and bypass even in you tap into the data line.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tedmond wrote: hardwire or w2w the bypass to the cm6000 and d2d the drone. or you can piggyback the d2d connector as well. the compustar will differentiate the drone and bypass even in you tap into the data line.

thanks for the response so i can splice the dr1000 4 wire data into the bypass 4wire data connector and or wires and the cm 6200 will sort them out ?

precisely. we did one a while back to test and we never heard of any issues from the customer. he loves it on his is250, plus the install was quick and clutter freeTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

thanks Ted works great appreciate the help