d2d port, can it be split for 2 devices?

I have a question for my friend, Dave, who needs help wiring up his keyless entry door locks to his remote starter in his 07 Infiniti FX35. I tried searching for this, but didn't come up with anything relevant. His vehicle has a XK09 module as a bypass for the remote starter and it is connected to his Viper 5501 (4702V) via the D2D port. I am going to have him pick up an XK02 module with the NISSDL firmware so we can use it for what it supports: Arm Factory Security Disarm Factory Security Door Lock Control Door Unlock Trunk / Hatch Release The question I have as I have never done a car that needed 2 different bypasses, can the D2D port be split with a Y type cable to allow both devices to communicate via D2D or do I have to use W2W to connect this module to his vehicle? Thanks, Dan

i know on compustar you can split the d2d and not have issues, cant speak for the viper unit. using a fortin EVO-all, evo-can will make your life easier than the xk09/02. the fortin is an all in one solution. If you prefer directed products the DB-ALL or iDatalink ADS-AL-CATed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tedmond wrote: i know on compustar you can split the d2d and not have issues, cant speak for the viper unit. using a fortin EVO-all, evo-can will make your life easier than the xk09/02. the fortin is an all in one solution. If you prefer directed products the DB-ALL or iDatalink ADS-AL-CA

Thanks, I think I found the answer to my question... http://www.xpresskit.com/product.aspx?productid=424 - Dan