2006 chevy hhr remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 chevy hhr remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: January 10, 2012 at 11:23 AM / IP Logged

Putting in a Remote start on a 2006 HHR Wondering if anyone has a wiring diagram and if anyone knows which wire the bcm data line is at the bcm for the bypass. dlpkgm. Thanks

Back to Top

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: January 10, 2012 at 12:10 PM / IP Logged

Wire Diagram

As for the bypass, you'd be better off going with just the DLPK. It will control more than the DLPKGM (according to xpresskit.com) and will make the install a ton easier. The mux circuit can be a royal PITA to wire up manually. The DLPK will take care of the mux circuit, the immobilizer, locks, etc all through data. The DLPKGM will ONLY control the locks... so you will have to get an immobilizer bypass as well.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Back to Top

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: January 16, 2012 at 8:01 AM / IP Logged

what wire is the bcm data wire is what i am trying to figure out? I will be doing this remote starter next week. Thanks

Ryan

Back to Top

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 16, 2012 at 8:40 AM / IP Logged

The Data wire at the BCM is in connector C2 ( top plug of BCM ). It is a Tan/White wire at Pin 12.

As Kenny pointed out, the DLPKGM will not do the transponder bypass function, only the door locks.

Soldering is fun!

Back to Top

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: January 17, 2012 at 9:04 AM / IP Logged

I am using the dlpk. Thanks a bunch guys

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 chevy hhr remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.