viper remote fault tones, '11 silverado

Home / the12volt's Install Bay / Car Security and Convenience / viper remote fault tones, '11 silverado (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flyboy12

Member - Posts: 11

Joined: December 16, 2011

Location: South Dakota, United States

Posted: January 12, 2012 at 4:52 PM / IP Logged

I have a Viper 5701 installed with a DBALL module on my '11 silverado.

Recently my remote will give a fault tone and the Arm and Function LEDs light up about 5 seconds after i arm/lock the system. the doors lock and the lights flash as normal.

Heres the annoying thing: if i unlock/disarm the system within about 5-10minutes after arming, the OEM alarm goes off! at that point the only way to get in is to use the actual key into the door, the remote wont unlock the doors!

Any Ideas? Ive searched and found nothing...

flyboy12

Member - Posts: 11

Joined: December 16, 2011

Location: South Dakota, United States

Posted: January 16, 2012 at 12:31 PM / IP Logged

any ideas anyone??

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: January 16, 2012 at 12:51 PM / IP Logged

How do you have everything wired. Is it D2D or W2W? If D2D, then you may want to try changing everything out to W2W and connecting the factory arm/disarm outputs to the lock/unlock inputs of the DB-ALL

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper remote fault tones, '11 silverado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.