2012 camry bypass

Does anyone know where I can get a bypass for a 2012 PTS Toyota Camry. I've tried ADS and Fortin but can't seem to find anything.I drink current, eat ohms, and bleed voltage

If its the same as the 2011, then the Evo-All should do it. I would check with Fortin first to be sure (unless someone on here knows)Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

no bypass solutions yet. only option is key in the box. they have new encryption which could possibly be 120bit. important notes: pulse child lock with disarm or if the user locks with the factory remote, the aftermarket remote will not unlock doors. child safety Violet (-) rests at ground when unlocked Lock - Red (-) Unlock - Green (-) pulsing child safety will not unlock doors. diode isolate disarm to keysense. DO NOT use GWR or status. the security light will stay on in the cluster when key is inserted. Applies to all 2012+ toyota vehicles. info was gathered from iDataLink dealer bulletins and summed up here.hope it helps. Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

The guys at Idata say they get at least 20 calls a day on this car. They are working on it....

Tedmond, "PTS"...

Mike M2

Tech Manager

CS Dealer Services

forget the RFID in the box didnt notice it was PTS.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Did a regular cut key 2012 Camry the other day. I used the arm and disarm wires in the vehicle to lock/unlock the doors along with disarm the factory alarm. Piece of cake. We do these for the deal all the time.I drink current, eat ohms, and bleed voltage

None of the bypass companies have anything for the PTS 2012 Camry yet. Your options are the following: 1. Wait. 2. Aftermarket remote starter with DEI 1101T, or possibly solder wires onto smart key and use a relay instead of 1101T. 3. Toyota factory remote starter. Installation is easy (the car comes mostly pre-wired) but the part is expensive, range is short, runtime is short, and you NEED the Toyota dealer's scan tool to program the remote starter to the car.