the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pkall programming 2000 toyota avalon


Post ReplyPost New Topic
< Prev Topic Next Topic >
kog506 
Member - Posts: 29
Member spacespace
Joined: February 05, 2012
Posted: February 14, 2012 at 11:08 PM / IP Logged  
I am confused on the PKALL connection and the programming.
For the connection, I am going to use D2D installation to the RS, Do I need to use any other wires? To program (Pr.2,Page 14) it says that I have to connect the D2D then connect the Connector 2. But Pg. 1 only show that I only need the D2D and (con.8 page 7) shows that I need the connect the RELAY wire (4 pin) if I an using Hard wiring. Can someone clarify this for me. PKALL Manual
And I have the PKALL and XK01 which modules should I program/connect first? and I should connect the RS wirings before programming any of the modules?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 14, 2012 at 11:29 PM / IP Logged  
the 4 pin relay and the 6pin need to be connected to the vehicle.
the d2d cable is just for power/ground/gwr.
i would just that off that jst use RED / black for power and the blue/white on the 6pin for status
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer