compustar 6000 brain

Home / the12volt's Install Bay / Car Security and Convenience / compustar 6000 brain (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

BrandonClaps

Member - Posts: 22

Joined: November 21, 2003

Posted: May 05, 2012 at 12:17 AM / IP Logged

Installed a Compustar 6000 brain and I'm trying to program the remotes but as soon as I turn on the ignition the alarm goes off. I can't disarm the alarm because the remotes aren't programmed yet.

I've tried pulling all the wires except power, ground, ignition and accessory and it still cycles the alarm and the only way to stop it is to pull the fuse. If I pull the ignition wire the alarm doesn't go off, but I can't program the remote then. I've even tried to re-flash the brain and blade and still not working.

HELP!

soundnsecurity

Gold - Posts: 2,711

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 10, 2008

Location: Louisiana, United States

Posted: May 05, 2012 at 9:39 AM / IP Logged

every alarm has a manual disarm procedure. if you have the owners manual for that alarm im sure it will tell you what to do.

Search for other posts by soundnsecurity

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 6000 brain

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.