mazda3 clutch bypass

Home / the12volt's Install Bay / Car Security and Convenience / mazda3 clutch bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chek

Copper - Posts: 69

Joined: August 17, 2011

Location: Arizona, United States

Posted: September 01, 2012 at 8:31 PM / IP Logged

Any tricks? It tests positive when clutch is pressed but it won't bypass no matter what I try.......

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 01, 2012 at 10:58 PM / IP Logged

If you remote start the vehicle while you press the clutch, does it start?

Back to Top

chek

Copper - Posts: 69

Joined: August 17, 2011

Location: Arizona, United States

Posted: September 02, 2012 at 1:34 PM / IP Logged

Yes it starts with the clutch in...I'm wondering if it needs to see a certain resistance value...

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 02, 2012 at 1:48 PM / IP Logged

Are you sure you have the right clutch wires ? Disconnect the clutch wire connector and see if it still starts. If it starts then you have the wrong clutch wire.

Also, how did you test for the proper wire ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 02, 2012 at 5:53 PM / IP Logged

If your vehicle is outfitted with cruise control, as stated above, there are 2 clutch switches. One to notify the cruise that you pressed the clutch, this happens at the beginning of the cycle. Second switch is the one you need, it is only activated when the clutch is fully depressed.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mazda3 clutch bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.