the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 nissan titan burning smell.


Post ReplyPost New Topic
< Prev Topic Next Topic >
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 1:20 AM / IP Logged  
I recently installed a remote start unit (VIPER 5704) everything was working fine, remote start functioned properly the night before for the full 12 minute run cycle. When I remote started the car this morning 5 minutes into driving I smelt a burning smell. It was from the remote start module. I was wondering If any of my wires were connected wrong?
CAR      5704
GREEN (12+)----- RED / WHITE     RED      RED / BLACK
BROWN (STARTER) ----- VIOLET       GREEN
LIGHT GREEN (2ND STARTER) ------   PINK/WHITE
BLACK/ RED (IGNITION) ------- PINK
RED (ACCESSORY) -------ORANGE
PURPLE (2ND ACCESSORY)------- RELAY (87)12+ (85)GND (30) PURPLE(5704) 86) RED (CAR)
WAS I SUPPOSED TO USE THE PINK/BLACK WITH THE PINK/WHITE?
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 1:21 AM / IP Logged  
flex relay was set to 2nd starter
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: October 22, 2012 at 1:55 AM / IP Logged  

Assuming that the Titans' Brown Starter wire was cut and the 5704 Green & Violet wires were connected as per...

Not following you ACC2 relay wiring (  Pin (30) PURPLE(5704) ) and it looks like it would be ON not only during R/S but

also with the ignition key.  The easier ( and more logical to me ) way would be :
Relay Pin 85 to Viper ORANGE (-) 200mA ACCESSORY OUTPUT
Relay Pin 86 and 87 to +12V constant fused at 25 Amps
Relay Pin 30 to Titan Purple ACC2 wire
Relay Pin 87A not used - insulate

Soldering is fun!
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 2:04 AM / IP Logged  
brown starter wire was cut and connected as described.
 87- 12v+
    
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 2:06 AM / IP Logged  
       87- 12v+
86- RED ACC from car   87A- empty      85-GND
       
       30-Purple
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 2:07 AM / IP Logged  
Is this the wrong way to relay the ACC2? and would this cause the 5704 brain to burn?
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: October 22, 2012 at 2:18 AM / IP Logged  

OK. Relay Pin 30 to Titan Purple ACC2.

No, it will work and shouldn't hurt the Viper.  But as mentioned above it will also be on all the time the key is running the truck, too. 

Maybe there is another wiring issue, but the H3 ignition wires look OK ( assuming all Titan ignition wires were DMM verified ).

Soldering is fun!
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 2:28 AM / IP Logged  
color codes were obtained from directechs. Could you think of any other possibilities as to why the brain has been fried? all on board relays are not functioning anymore either. parking lights as well. TITAN parking lights are + and the brain jumper was set to +. No other wires are + triggers, and all others are - triggers.
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: October 22, 2012 at 5:45 AM / IP Logged  
Where was the unit grounded?
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
s2kii 
Member - Posts: 8
Member spacespace
Joined: May 19, 2012
Location: Hawaii, United States
Posted: October 22, 2012 at 12:25 PM / IP Logged  
The unit is self taped to the driver kick panel.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer