508d compatible with the viper 5704?

Home / the12volt's Install Bay / Car Security and Convenience / 508d compatible with the viper 5704? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lilflippy

Member - Posts: 47

Joined: October 18, 2012

Location: Illinois, United States

Posted: November 17, 2012 at 4:50 AM / IP Logged

Hi I have this the Viper 5704 and ordered a 508D Dual-Zone Radar Sensor.

I was reading in the install manual that Sensor ports 1 and 2 cannot support sensor 508D due to current limitations. These ports are also

constant power and ground connections.

How would the 508D hook up to my system?

Please reply back thanks?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 17, 2012 at 6:49 AM / IP Logged

The answer is so simple, run the power to the red feed and the ground to the regular ground.

You must held the record for silly posts with obvious answers and yes Kregg if you read this the blood pressure has started to climb.

lilflippy

Member - Posts: 47

Joined: October 18, 2012

Location: Illinois, United States

Posted: November 17, 2012 at 9:14 AM / IP Logged

howie ll wrote:

The answer is so simple, run the power to the red feed and the ground to the regular ground.

You must held the record for silly posts with obvious answers and yes Kregg if you read this the blood pressure has started to climb.

OK kool. And I can just plug.the.green and.blue.wire to the empty sensor.port right?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 17, 2012 at 9:20 AM / IP Logged

Yes.

lilflippy

Member - Posts: 47

Joined: October 18, 2012

Location: Illinois, United States

Posted: November 17, 2012 at 7:17 PM / IP Logged

What would happen if I plugged it into one of the sensor ports?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 17, 2012 at 11:08 PM / IP Logged

Try it and let me know.

lilflippy

Member - Posts: 47

Joined: October 18, 2012

Location: Illinois, United States

Posted: November 18, 2012 at 6:58 PM / IP Logged

howie ll wrote:

Try it and let me know.

Update so I connected the 4 pin to one of empty sensor ports and it work. Now I just have to adjust and tweak it.

I mounted it the middle of my overhead console. Would that be the best position for this sensor?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 19, 2012 at 1:36 AM / IP Logged

yes.

mosesaro

Member - Posts: 1

Joined: July 13, 2013

Posted: July 13, 2013 at 9:27 PM / IP Logged

lilflippy wrote:

What would happen if I plugged it into one of the sensor ports?

lilflippy how did you installation of the 508D with 5704 go. Does it work if you just plug it in directly?

lilflippy

Member - Posts: 47

Joined: October 18, 2012

Location: Illinois, United States

Posted: July 14, 2013 at 9:40 AM / IP Logged

mosesaro wrote:

lilflippy wrote:

What would happen if I plugged it into one of the sensor ports?

lilflippy how did you installation of the 508D with 5704 go. Does it work if you just plug it in directly?

Hi Yes I just plug it in and it works.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

508d compatible with the viper 5704?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.