the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper bad locks?

Home / the12volt's Install Bay / Car Security and Convenience / viper bad locks? (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
bens300 
Member - Posts: 12
Member spacespace
Joined: December 22, 2003
Location: United States
Posted: December 09, 2012 at 2:57 PM / IP Logged  

I bought a 5704 and got to the door lock part and...

Unlock works, sends a negative to the door unlock wire.

Lock doesnt work, it sends 3 volts out.

Any ideas whats up?  Thanks in advance.

Ben

bens300 
Member - Posts: 12
Member spacespace
Joined: December 22, 2003
Location: United States
Posted: December 09, 2012 at 3:04 PM / IP Logged  
Also its a 2009 Civic just to put it out there.
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 09, 2012 at 6:03 PM / IP Logged  
Did you verify that you have the correct lock wire in the car... I show green in kick panel for lock...
bens300 
Member - Posts: 12
Member spacespace
Joined: December 22, 2003
Location: United States
Posted: December 09, 2012 at 6:14 PM / IP Logged  
ive got the correct wires in the car.  it s the alarm thats putting out 3 volts.  it should be a negative pulse, right?  The unlock wire from the alarm puts out a negative pulse and unlocks correctly.
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: December 09, 2012 at 6:38 PM / IP Logged  
actually a vipers outputs are positive and negative, each wire does both . the green lock wire is negative for lock but it is positive for unlock. are you testing the wire by itself or are you testing it while it is hooked to the cars lock wire?
bens300 
Member - Posts: 12
Member spacespace
Joined: December 22, 2003
Location: United States
Posted: December 09, 2012 at 6:53 PM / IP Logged  
im testing it unhooked from the vehicle.  unlock gives me a negative pulse and lock give me a 3 volt pulse.
bens300 
Member - Posts: 12
Member spacespace
Joined: December 22, 2003
Location: United States
Posted: December 09, 2012 at 8:48 PM / IP Logged  
Anyone?  Its driving me crazy.  Also the only output on the alarm for the trunk release is negative.  Do i need to program it to change to positive or do i need a relay.  The trunk release is positive in the car.
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: December 14, 2012 at 9:27 AM / IP Logged  
Relay for trunk release. Hook up the door lock and test it attached to the wire.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer