the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ultra start 1272 08 ford 500


Post ReplyPost New Topic
< Prev Topic Next Topic >
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 11, 2012 at 4:52 PM / IP Logged  
Checked out a friend of mine remote starter the other day. Her transmitter was toast. I had a couple of the Ultra start transmitter so I tried to program them. Did the key on key off and key on and left it on... pushed and held the button on the antenna.. no horn honk because it is not hooked up but got 5 relay clicks from the unit.. Will not program the new transmitters... Pulled the unit out and on the back of the unit it said G11 as the model... Does anyone know if there is a different programming procedure for this model? It does not even list it on their website.... Thanks for your help!!!!
kreg357 
Platinum - Posts: 7,787
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: December 11, 2012 at 5:10 PM / IP Logged  

The G11 should be the same as the U12xx series.  I have programmed many different AM remotes to them.  Seems to take them all.

I will upload the G11 Install Guide to the Downloads section for futher reference.

Here is the link :  https://www.the12volt.com/installbay/file.asp?ID=1180

Soldering is fun!
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 11, 2012 at 7:44 PM / IP Logged  
Oh that is a lot more clear. I was not holding the button when pressing the lock button on the transmitter... I will give it another try this weekend.. Thanks for all your help.... Have a great Christmas!!!!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer