db all and rsr

I don't use dei. But I seen that they have an RSR application for my 2010 maxima. Is it the same as the RS firmware with idatalink ? No starter needed just the bypass? With factory lock lock lock activation? If so does anyone have the PDF with the install diagram for a 2010 maxima with RSR. I may have to use a dei product in my car. Hell is now frozen.

I wouldn't want a DEI bypass in my car either!! I don't see an RS standalone solution for idatalink or Fortin. If it were me, I would get an add-on RS like a Crimestopper Coolstart RS00-G3 and connect via data to an idatalink ADS-ALCA. The idatalink module won't do standalone RS but will allow Aftermarket Remote Start From OEM Remotes via data to the Remote Start unit. It's a feature that must be enabled when flashing the module and will allow Lock, Lock, Lock starting. Would give you the best of both worlds.

I've done the db-all in new Nissan pts cars. It worked great. Db-all+2 relays is all you need.

beegbie wrote: I've done the db-all in new Nissan pts cars. It worked great. Db-all+2 relays is all you need.

You wouldn't have the PDF of the install guide would you? Apparently you can't get the guide until you configure a db-all for RSR. And all I carry is idatalink and fortin

metz35 wrote: beegbie wrote: I've done the db-all in new Nissan pts cars. It worked great. Db-all+2 relays is all you need. You wouldn't have the PDF of the install guide would you? Apparently you can't get the guide until you configure a db-all for RSR. And all I carry is idatalink and fortin

http://www.xpresskit.com/product.aspx?productid=461#m_401.NISS4HT