the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

rs on 2006 honda odyssey


Post ReplyPost New Topic
< Prev Topic Next Topic >
laziebun 
Member - Posts: 39
Member spacespace
Joined: August 14, 2009
Posted: December 20, 2012 at 8:11 PM / IP Logged  
Can anyone tell me where the rear defogger wire is at?
Also in reference to the Xpress XK09, if i D2D the unit to the viper 5904, do i need to do anything else for the power side door to work?
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: December 20, 2012 at 10:25 PM / IP Logged  
Rear Defrost BLACK / YELLOW (+) UNDER HOOD FUSE/RELAY BOX
Note:THIS VEHICLE USES DATA TO CARRY THE REAR DEFROST SIGNAL FROM THE A/C CONTROL UNIT TO THE UNDER HOOD FUSE/RELAY BOX, MUST USE RELAY AND FUSE AT 30 AMPS
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
laziebun 
Member - Posts: 39
Member spacespace
Joined: August 14, 2009
Posted: December 21, 2012 at 7:35 AM / IP Logged  
could someone explain "uses data...." part to me?
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: December 21, 2012 at 9:27 AM / IP Logged  
data means that there is no analog way of controlling that particular feature, such as, supplying +12vdc, ground, or the use of resistors to +12vdc or ground, etc. I looked at the popular interfaces and none seem to be able to active the rear defrost feature. The only analog method requires you to pick the wire at the fuse box in the engine compartment.
I do not install DEI products but if the 5904 have auxiliary 1 & 2 channels, it should work. The 5904 may refer to them as different numbers depending on convention they are using, you will need to test the function to determine the proper channel.
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer