db all hookup

Home / the12volt's Install Bay / Car Security and Convenience / db all hookup (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

uponone929rr

Member - Posts: 3

Joined: January 20, 2011

Posted: December 21, 2012 at 7:47 PM / IP Logged

I Have 2008 Chevy Silverado w/ Factory Remotestart. I am putting a 5501 Viper system in to extend range, I using A DB-ALL, RFLOOP and OBDTHRGM2. I got an issue.. I go to use the remote start it cycles like it started but it never does ... The remote acts as if it was runing for about a minute then says remote start error.

I have the The power, ground and Neutral saftey hooked up as the dball instructions say to. I have no Idea what the issue is. Any Ideas

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: December 24, 2012 at 6:56 AM / IP Logged

Are you trying to use the 5501 to control the factory remote start?

If so the XL202 and the 6711t antenna with a 7752 remote connected to the dball will do everthing you need.

Otherwise with the 5501 you will need to do a complete remote install like there is no factory remote start.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

db all hookup

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.