dball + viper 5704 + vsm200, connectioné

Home / the12volt's Install Bay / Car Security and Convenience / dball + viper 5704 + vsm200, connectioné (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wup123

Member - Posts: 7

Joined: June 24, 2010

Posted: January 01, 2013 at 1:34 PM / IP Logged

I was just wondering how to go about connecting this all together. They all have a D2D port, and the 5704 and VSM200 have a bit writer port. Will it work if I hook it up as follows

VSM200----(bit writer)----5704---(D2D)----DBALL

Or is there another way I should be hooking them togetherÉ

Thanks

Back to Top

shortcircuit161

Silver - Posts: 556

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 29, 2010

Location: United States

Posted: January 02, 2013 at 11:32 AM / IP Logged

Yes that is the correct way to do it.

You would connect the DBALL using the D2D cord direct to the 5704.

You would connect the VSM200 to the bitwriter port. You would not use any of the other data plugs from the Y-adapater on the VSM200.

Back to Top

Search for other posts by shortcircuit161

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dball + viper 5704 + vsm200, connectioné

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.