viper 5706p auto trans program :

Well worked until 4:30 am Saturday night pullng out all the wiring of the Carvox remote starter/alarm all went well for the most part.

All connections are soldered and shrink wrapped and everything works well for the alarm except the remote starter? It keeps showing an error on the 2way remote flashes 7 times, the manual says it is in manual transmission mode? Seems they default to manual transmission still trying to find out how to program it for auto transmisson and as well set the time on the 2way remote display?

Anyone know how to fix this?

Thanks

Randy 

Open car door, Turn ignition on, then off. Press AND hold button on antenna until you hear three chirps from the siren, release the button, then press the button ONCE and release, then Press and HOLD. Should get one chirp and one flash from the LED. Press the lock button on the remote, should get two chirps. Release the button, Turn the ignition on then off. Should be in automatic mode. 

Don't forget to do TACH learning.

Thanks will try that again, one thing I did hook up the tach wire to protect against over reving may I trouble you for the tach learning sequence please?

Thanks again

Randy