2013 wrx trunk release viper alarm/rs

Home / the12volt's Install Bay / Car Security and Convenience / 2013 wrx trunk release viper alarm/rs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

steven17s

Member - Posts: 6

Joined: October 07, 2009

Location: Wisconsin, United States

Posted: June 10, 2013 at 8:49 PM / IP Logged

Hoping someone can help, I am preparing to install my Viper 5704 alarm/RS into my 2013 WRX sedan and the trunk wiring information indicates to wire into the trunk release motor wires directly on the sedan. Has anyone wired one of these themselves and have any pointers or better yet photos? I am aware that the datalink does trunk release with the negative output but I have decided to go analog. I searched the forum and have not been able to locate a post that addresses this.

Also, on the wiring information I have it states that the 2013 WRX may have the 2011 wiring? Can anyone confirm? Any info is appreciated. Thanks!

Back to Top

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: June 10, 2013 at 9:22 PM / IP Logged

Yes, it can have the 2011 wiring. The only way to confirm is to look at the wires and see what you have. Do yourself a favor and pick up a 2nd bypass rather than going analog. It will save you a bunch of connections to the vehicle and it won't be as 'intrusive' to the vehicle wiring. Also, it allows easier integration with the factory alarm. It will also save you from having to go under the hood for tach signal (will still have to get under the hood for the hood pin though)

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Back to Top

steven17s

Member - Posts: 6

Joined: October 07, 2009

Location: Wisconsin, United States

Posted: June 16, 2013 at 10:15 PM / IP Logged

I performed the install on my 5704V this weekend and went very smooth. In my opinion it was easier wiring the car without the data link since the '13 WRX has the '11 wiring that has majority of the wires at the BIU (door triggers, locks, trunk release, parking lights, trunk trigger, etc.). Also had no issues with the factory alarm triggering from the remote start and did not need to wire in the key sense for disarm.

For anyone else curious on how to wire the trunk release motor, this diagram was very helpful:

< color=#22229c>http://www.bulldogsecurity.com/diagr...%20DIAGRAM.pdf

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2013 wrx trunk release viper alarm/rs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.