clifford matrix +1

Doing an install on my 2000 chevy c/k 3500 Service Truck. A little confused on where my connections Need to be. The Manual says connect Its yellow wire (86 on relay) to 12 Volt ignition when on and run. Should this be the pink or white? Green (30 on relay) to ignition switch. Black (87a) to starter. Found the wires, when ignition is on both wires got +12 volts. My assumption is yellow to pink and green to white?

I got it all wired, now when Alarm is activated u Can still hear the Starter cranking. When Alarm is off start up is Not smooth. You Can hear the starter continue to turn over.

I figured it out. Black and green Goes to yellow.