2006 mercury mariner

Home / the12volt's Install Bay / Car Security and Convenience / 2006 mercury mariner (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

joe363

Member - Posts: 13

Joined: August 21, 2009

Location: New York, United States

Posted: August 28, 2013 at 9:35 PM / IP Logged

Hi..I'm putting in a Autopage rs730. I see I have to connect to the battery. Do I have to run two feed wires? Or can I run one 10 gauge and connect both 30 amp leads to that? Also I red one post that said to connect to the ignition 12 volt but drop the 30s to 10 amp fuses..that seems like not the right thing to do..what would you do?

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: August 30, 2013 at 8:06 AM / IP Logged

One wire from the battery should be fine fo power everything up

triniforever

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 mercury mariner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.