viper 3303, 1968 corvette

I'm putting a viper 3303 in a 68 Corvette and have the alarm features working. I have 2 questions. #1 I installed aftermarket door locks that lock and unlock with relays. Witch wires on the 3303 door lock harness are used to activate the relays I have? The old alarm I had used a blue and green wire. If these wires are grounded one at a time the locks work. #2 Does the dome light stay on when the doors are unlocked and if so witch wire goes to the dome light relay? Thanks Dave

If the current after-market door lock system needs a simple (-) signal to work, here is the 3303 lock wiring : H2/1 VIOLET* UNLOCK #87 NORMALLY OPEN (INPUT) Chassis Ground H2/2 BLUE/BLACK UNLOCK #30 COMMON (OUTPUT) Blue wire ( present alarm ) H2/3 BROWN / BLACK UNLOCK #87a NORMALLY CLOSED Not used H2/4 VIOLET/BLACK* LOCK #87 NORMALLY OPEN (INPUT)       Chassis Ground H2/5 GREEN/ BLACK LOCK #30 COMMON (OUTPUT)     Green wire ( present alarm ) H2/6 WHITE/ BLACK LOCK #87a NORMALLY CLOSED   Not used H2/7 WHITE/ VIOLET FLEX RELAY #87 NORMALLY OPEN (INPUT)** H2/8 WHITE/ BROWN FLEX RELAY #87a NORMALLY CLOSED**Soldering is fun!