5904v

Home / the12volt's Install Bay / Car Security and Convenience / 5904v (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ninjafast

Member - Posts: 5

Joined: October 08, 2013

Location: Washington, United States

Posted: October 08, 2013 at 6:16 PM / IP Logged

I have a 2011 Subaru WRX STi sedan. I have put a 5904v in it. I need to know 2 things #1 where does the (-)ignition 1 output go + the (-) starter output go ? And how to bypass the clutch? The alarm portion of the 5904v is working but not the remote start.

thank you in advance

ninjafast

Back to Top

ninjafast

Member - Posts: 5

Joined: October 08, 2013

Location: Washington, United States

Posted: October 08, 2013 at 9:10 PM / IP Logged

I am also using a 556u immobilizer interface , is there anything else I would need to make the remote start work in this car ?

ninjafast

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

5904v

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.