dball bypass programming fail

Home / the12volt's Install Bay / Car Security and Convenience / dball bypass programming fail (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

iono2013

Member - Posts: 6

Joined: October 08, 2013

Location: Minnesota, United States

Posted: November 05, 2013 at 1:29 PM / IP Logged

Hi all,

I have 2012 toyota camry with std key, after make the connection per wiring diagram manual that i download for my car and i check the connection seem to be correct, except i didn't connect the auto headlamp and park light wire. but when its come to programming the bypass on

step 6 :< size=2 face=ArialMT>< size=2 face=ArialMT>

Turn the ignition OFF and < size=2 face=ArialMT,Bold>< size=2 face=ArialMT,Bold>remove the key< size=2 face=ArialMT>< size=2 face=ArialMT>. The LED

keeps flashing green (quickly). Wait for the LED to flash

orange slowly (this may take up to 20 seconds). <======it's didn't do this and the led light went off completely.

does that's mean something not right or the module is bad?

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: November 05, 2013 at 3:17 PM / IP Logged

Is the DBALL flashed with the 401.TL5 v1.02 firmware? You can also try resetting the module and starting over.

Back to Top

iono2013

Member - Posts: 6

Joined: October 08, 2013

Location: Minnesota, United States

Posted: November 05, 2013 at 3:35 PM / IP Logged

I have the xkloader 2 and i try reflash a few time with the latest firmware avaiable for my vehicle and it still fail at the programming the module. if wiring not correctly it will show the error signal. but this one seem like bad module or d2d not communication or something. by the way i have it hooked up with viper 5701.

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: November 05, 2013 at 9:06 PM / IP Logged

I would triple check your connections, then try W2W

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dball bypass programming fail

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.