fortin evo all

Home / the12volt's Install Bay / Car Security and Convenience / fortin evo all (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tonythetiger

Member - Posts: 2

Joined: December 04, 2013

Posted: December 04, 2013 at 10:27 PM / IP Logged

If I use the evo-all bypass using wire2wire mode, do I need to hookup with the flasher updater to enable it W2W? I know D2D is enabled but I want to hard wire and I do not have a Flash updater at the moment.

Thanks

kreg357

Platinum - Posts: 7,788

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 04, 2013 at 10:42 PM / IP Logged

The EVO-ALL can go W2W without any special flash or set-up. Just follow the install guide and cut the D2D 4 Pin

cable, connect Red to +12V and Black to chassis ground and then make all the necessary hard-wired connections.

Soldering is fun!

tonythetiger

Member - Posts: 2

Joined: December 04, 2013

Posted: December 04, 2013 at 11:10 PM / IP Logged

Thanks for the quick reply, yes the data wires were cut and pwr and ground have been connected

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fortin evo all

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.