code alarm ca 5050

Can anyone help me out with the installer guide for the Code Alarm CA-5050? I would greatly appreciate any help and help for programming 2 remotes to this unit. Thanks again! Thanks, Bri

Install Manual link: http://documents.codesystems.com/710877.pdf The transmitter programming is done as follows: 1. Turn the ignition ON (between Accessory & Start). 2. Press and hold the valet/override button. 3. Within 10 seconds the system will chirp (3) three times. 4. Press 1 button of each transmitter you wish to program. (press the Lock button) 5. The system will respond with 1 chirp for each accepted transmitter. NOTE: The system will exit transmitter programming after 15 seconds of inactivity. NOTE: This system has 1 button programming which programs all channels (buttons) of the system on a single press of the transmitter lock button. NOTE: The system will hold up to 4 transmitters in memory, programming a 5th transmitter will erase the oldest transmitter in memory.Lectric Guy