wiring for 2010 sprinter van

I'm looking for wiring information to do an alarm install on a 2010 Freightliner Sprinter vanQuinn Maxwell

If this is the same as the European Mercedes Sprinter, use DB-ALL wired D2D, everything on that vehicle is easy to get at, siren and hood switch wire back through grommet, pick up corner loom for 12V+ and ground, CAN Hi and Lo, run antenna and lead, connect and initialise DB-ALL, then if you want, program DB-ALL for window up down. All done, I love em! So much easier than the hardwiring required on the pre-07 version.Test before boxing up.

The wiring info I need is the stock wire colors on the ignition harness, etc. I have the clifford alarm system ready to go, I just need the vehicles wiring diagramsQuinn Maxwell

Don't use the ignition wires all you'll have there are ignition 1 and 2 and ACC the starter wire is in the engine bay loom (violet). If this is a late Clifford with a brown data port use a DB-ALL so much easier. If an R/S you will need another part from Xpresskit.Test before boxing up.