viper 4704v wont turn off

Question, so I have my defogger wire connect not to the switch but in a kick panel that goes to the back. My problem, my wife decided to remote start the car and while in remote start mode she presses the defogger and then the car starts beeping (Horn) continuously!. I couldn't get the remote start to turn off so I had not choice but to disconnect unit. Now when I connect all the wires back into it the car starts automatically and will still not turn off unless I remove all wire harnesses to brain. Any idea how to fix?? RESET BRAIN??

First question I would ask is, what wires from the 4704 are connected to what exactly on the car. Make Model Year?When all else fails, Read the Instructions

Support the12volt.com Make a Donation

That would help! The remote start worked fine before this. I had just finished installing last night until this morning I had this issue. I think its because I didn't connect the defogger wire to the actual switch? 24 pin- neutral safety         door input (-)         dome light output         door input(+)         brake shutdown (+)         dark blue (-) Status output         defogger(-) 6 pin - 12v constant         ground         honk output 3 pin- unlock/ lock output 8 pin- ignition 1 & 2         Constant         Accessory         Starter

2009 Toyota Corolla. Im confident all of the wires are connected to where they are supposed to go EXCEPT for the defogger output which I had connected to a Black wire in a 5 pin harness in kick panel.

Your listing for connections are vague. I would say to disconnect the defrost connection you made. See if the problem goes away.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Im sorry. I did disconnect that defog wire. I feel I connect something wrong and the brain is malfunctioning. There a way to reset the brain completely?

time to check your connections. the unit should not auto star everytime its connected,Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Will do. One more question for you, How do I access the program menu to change the defogger 2nd status to latched? Do you have a procedure? I can't seem to find this info anywhere.

If you list all of your connections from the remote starter to your car, it might give an idea what might be wrong.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

09 corolla 24 pin: H/1(-) 200MA FLEX RELAY CONTROL OUTPUT-- (NC) H/2 (-) NEUTRAL SAFETY INPUT- ( HAVE THIS GROUNDED) H/3(-) REAR DEFOGGER ( NOT CONNECTED ANYMORE) H/4(-) ALARM/DISARM ( NC) H/5(-) TRUNK RELASE (NC) H/6(-) DOOR INPUT (DRIVER DOOR TRIGGER CONNECTION) H/7(-) CONNECTED TO DOME LIGHT H/9 (-) CONNECTED TO BYPASS MODULE H/10 THRU H/15 (NC) H/16- BRAKE SHUTDOWN CONNECTED H/17 THRU H/24 (NC) 3 PIN : DOOR LOCK/UNLOCK -CONNECTED 8 PIN REMOTE START IGNITION 1 IS CONNECTED AS WELL AS IGN #2 12+ CONSTANTS ARE ALL CONNECTED TO CONSTANTS STARTERS CONNECTED ACCESSORY FLEX REALAY INPUT( NC) 6 PIN 12+ CONSTANT GROUND HONK OUTPUT