2013 rav4 wiring diagram

HI, I am looking for any of the wiring diagrams/charts for the 2013 RAV4. Yes, I know that a pictorial exists for the installation of a remote start, but no wiring info for door switches, etc are given. Specifically I am looking for wiring info for an alarm system installation. Thanks

For vehicle wiring, here are some sources :

Here is a link to Bulldog Security :  http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspHere is a link to Ready Remote :  http://www.readyremote.com/main.asp

The above site's info does not list all the individual door trigger wires, so here is that specific info :

Driver Front Door Pin           WHITE (-) DASH FUSE BOX WHITE 40 PIN CONN, PIN 40 Pass Front Door Pin   BLUE (-) REAR OF DASH FUSE BOX WHITE 30 PIN CONN, PIN 19 Driver Rear Door Pin WHITE (-) REAR OF DASH FUSE BOX WHITE 30 PIN CONN, PIN 1 Pass Rear Door Pin   YELLOW (-) REAR OF DASH FUSE BOX WHITE 30 PIN CONN, PIN 6 Trunk Pin   LT GREEN (-) DASH FUSE BOX WHITE 40 PIN CONN, PIN 33 Hood Pin    RED / WHITE (W/ OEM RS ONLY) (-) WHITE 5 PIN CONN, PIN 4 ABOVE DRIVER KICK   ***

***  Your 2013 LE won't have the factory hood pin.

If you don't want to hard-wire everything, iDatalink has come out with new firmware for their ADS AL-CA bypass module that

will do most of the work for you with only a few connections to the car.  Here is a link to the ADS AL-CA w/ DL-TL8 firmware :  http://cdncontent2.idatalink.com/corporate/Content/Manuals/DL-TL8/ADS-AL(DL)-TL8-EN_20141120.pdf

Soldering is fun!

don't forget to diode isolate, or you can use the: dome light gray (-) white 56 pin plug, pin 35 @ fuse box plug 3D Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert