2010 rav4 with cm7200 issues

Installed today, starts up fine remotely, except will remote start with the doors or trunk open. At first I had the door trigger wired to the dome sensor(-) , which I thought would work, but didn't. So, for now I just hooked up the LF door(-) to the door trigger and trunk is connected to trunk trigger.   I did verify ground on the wires with the LF door or trunk open. I have the door trigger jumper on the 7200 set to minus. Am I missing something? Oh, and I haven't put in the hood switch yet.. tomorrow. Everything else works fine.. door lock/unlock ( I may program double pulse)...brake pedal shutdown... anti-grind... evo-key bypass. Thanks, Jeff

whats the issue? The 7200 is a remote starter only, and can be programmed to be a passive alarm (option of adding shock sensor and siren)Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry.. it will remote start with the doors or truck open, I didn't think it was supposed to do that. I haven't tried grounding the hood pin wire yet.

that's normal.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Yes, I apologize, not sure why I had it in my head that it wouldn't start with the doors open. Just went out and tested the hood sense wire... it definitely won't start when that's grounded. :) Thanks