autopage brainfart, won't go into programming

im installing rs6652way remote start autopage and got everything hooked up. the valet button works everything looks to be connected when I try to learn tach it wont go into programming mode I cycle the ignition 3 times and press 11 times and hold but it doesn't chirp damn it lol I just want it to chirp this car is a bit funky its a 93 civic that possibly had dash harness replaced because it has the door lock plug above fuse box that is not going anywhere. and some wires don't match it has WHITE/ black wire that seems to be ignition2 on integra but not on civic. and it acts like an accessory. no voltage during cranking. everything else works on the alarm I tested all other wires

Check door trigger and verify that you did get an ignition wire. If you accidently got the Acc try programming but using Acc Only. If it works move the wireTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert