Trunk output to Trigger Start In

Home / the12volt's Install Bay / Car Security and Convenience / Trunk output to Trigger Start In

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xmentalcasex

Member - Posts: 11

Joined: January 11, 2015

Posted: March 11, 2015 at 5:02 PM / IP Logged

I have a CM7200 installed with the EXGO accessory and the EZGO has the ability to release a trunk, but not remote star. My car does not have a trunk release, so I am looking to connect the trunk output to the trigger start input.

After looking at the diagram the trunk out put is negative and the trigger start in is positive. Do I have to covert the negative output to use it with the positive input?

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 11, 2015 at 7:27 PM / IP Logged

the trunk output is positive on the large gauge harness. GREEN / WHITE assuming you have not used it for parking lights or starter2

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.