Install Remote Starter, 2003 Honda Pilot

Home / the12volt's Install Bay / Car Security and Convenience / Install Remote Starter, 2003 Honda Pilot

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

goofy1953

Member - Posts: 10

Joined: November 30, 2002

Location: Canada

Posted: September 12, 2015 at 3:15 PM / IP Logged

Hi,

I just install the Python 4806P 2 way remote stater on 2003 Honda Pilot.The labor cost $150.When the job done,there is no hood pin switch,valet switch.Beside in installation guide mention about Neutral safety switch which he didn't install.I don't think he do the job done

right.Do I?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 12, 2015 at 4:50 PM / IP Logged

Go back and complain. Hood pin switch is mandatory. I always lose the neutral safety no one asks for it. As long as the black white goes either to a parking brake switch (manual) or ground (auto) it's OK.

Valet switch is in the antenna.

PS Have you tested for a hood pin, i.e. leave the hood open if it still starts you're right there isn't one.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.