Elantra 2010 GLS. Viper 5706V Alarm only.

Home / the12volt's Install Bay / Car Security and Convenience / Elantra 2010 GLS. Viper 5706V Alarm only.

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

b7777777

Member - Posts: 3

Joined: September 18, 2015

Location: Quebec, Canada

Posted: October 12, 2015 at 7:20 PM / IP Logged

Hi.

Need some help installing Viper 5706v, no remote start cuz don;t really want to tamper with start just yet. I saw this thread, but OP is installing remote starter with no immobilizer.

My elantra has immobilizer for sure. So any tips? I will start looking into the schematics this week and hopefully post.

If it is preferred I follow the thread below, please let me know.

Cheers.

https://www.the12volt.com/installbay/forum_posts.asp?tid=137012

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 13, 2015 at 4:01 AM / IP Logged

If you're not installing as a remote start you won't need to worry about the immobiliser. If you do then look at a DBALL2.

Back to Top

b7777777

Member - Posts: 3

Joined: September 18, 2015

Location: Quebec, Canada

Posted: October 22, 2015 at 9:20 PM / IP Logged

Thanks. Working on the interconnection now on excel spreadsheet. Will post before I go ahead and wire up. I just noticed that there is only two 'ports' for the sensors. Is there a way to add a third one? The viper comes with a shock, and I have bought the glass break and tilt sensors. Would be a shame if I don't use it all. Cheers

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 23, 2015 at 12:52 AM / IP Logged

Tilt is not wired to a port, use blue trunk, H2 diode separated if that trigger is used, to tilt blue, orange, H1 to tilt black, red H1 to tilt red.

Back to Top

b7777777

Member - Posts: 3

Joined: September 18, 2015

Location: Quebec, Canada

Posted: October 23, 2015 at 8:06 PM / IP Logged

thanks. I have to run to the store and buy myself a diode separater,1N4004 I'm guessing.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 24, 2015 at 6:31 AM / IP Logged

Yes.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.