dball2 RSR install Audi Q3 PTS

Home / the12volt's Install Bay / Car Security and Convenience / dball2 RSR install Audi Q3 PTS

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

itsu_o

Member - Posts: 18

Joined: February 13, 2015

Posted: October 25, 2015 at 7:11 AM / IP Logged

Hi all

I already installed dbal2l as RSR to Audi Q3 2015 4 times.

Yesterday I worked with Q3 2015 which is same spec as I installed two weeks ago.

Installation Type is 2.

all wiring is ok. but won't remote start.

If i place key fob with battery, It works. so just Immo problem.

I did both method 5 and 6. checked with 3 key fobs.

Car information display said key in not in car when remote start.

I checked wire again and again but nothing looks wrong.

Now I have no idea, nothing to do.

anybody here had same problem?

dball2

FW : VW02 RSR 3.83

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 25, 2015 at 8:02 AM / IP Logged

Just for a laugh, go to Directechs, click the US flag, select Europe and download the slightly different software for the European A3.

Follow the key wrap procedure EXACTLY, if it says 4-6 wraps then neither more nor less.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.