the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DBALL2 and autolight issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
mduong25 
Member - Posts: 23
Member spacespace
Joined: February 27, 2004
Location: United States
Posted: October 26, 2015 at 12:07 PM / IP Logged Link to Post Post Reply Quote mduong25
Installed a Viper RS with a DBALL2, followed diagram to interrupt the autolight but autolight still stays on after remote start shutdown. Does anyone have any suggestions or am I missing something? DBALL2 and autolight issue -- posted image.
mduong25 
Member - Posts: 23
Member spacespace
Joined: February 27, 2004
Location: United States
Posted: October 26, 2015 at 12:09 PM / IP Logged Link to Post Post Reply Quote mduong25
mduong25 wrote:
Installed a Viper RS with a DBALL2, followed diagram to interrupt the autolight but autolight still stays on after remote start shutdown. Does anyone have any suggestions or am I missing something? DBALL2 and autolight issue -- posted image.
This was done on a 2007 Lexus GX470, autolight wire is green orange at headlight switch.
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: October 26, 2015 at 8:57 PM / IP Logged Link to Post Post Reply Quote beegbie
Do you know what firmware version is on the db=all? Looks like there was a issue that was fixed a while ago.
"v2.41- Fixed autolamp and DRL issue on key type car"
mduong25 
Member - Posts: 23
Member spacespace
Joined: February 27, 2004
Location: United States
Posted: October 27, 2015 at 1:24 PM / IP Logged Link to Post Post Reply Quote mduong25
I have the latest version loaded in (v3.19). I am assuming that this version should cover v2.41's fixes as well? Please advise. Thank you.
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: October 27, 2015 at 8:35 PM / IP Logged Link to Post Post Reply Quote beegbie
Yes it should. Do you have a dmm? The orang/red yellow/red should have continuity whenever the remote start is off but not when it's active.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: October 28, 2015 at 6:19 AM / IP Logged Link to Post Post Reply Quote smokeman1
Are all of the doors closed after shut down?
Possibly, are the ORANGE / red and yellow/red on the wrong side of the autolight wire?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer